产品详情： 产品名称:浅色喷墨热转印纸(热撕)
产品型号:t-color 100r
产品规格: a4 (210mm x 297mm) - 100张/包, a3 ( 297mm x 420mm) - 100 张/包
适用墨水: 普通的水性染料或颜料墨水
1. 一般性说明
浅色热转印纸可以自由绘制图像,通过烫画机转印到浅色的纯棉t-恤, 帽子, 运动服, 毛衣, 箱包, 鼠标垫及它装饰品.色彩艳丽，耐水洗。 2. 打印建议
打印机设定为照片(p), 打印纸选项为普通纸, 打印墨水为普通的水性染料或颜料墨水.
3. 烫画机转印的过程
a. 使用烫画机温度设定在185°c，时间15秒．高压力.
b. 把衣服平整地放在烫画机底板上,烫平一下,5秒.
c. 热转印纸打印后,凉干,剪下来.
d. 把热转印纸轻轻放在衣服上面,打印面朝下.
e. 在185°c，烫画机压烫15秒.
f. 趁热撕下热转印纸背纸. 完成.
4. 注意事项
打印纸的保存环境: 相对湿度35-65%, 温度10-30°c.
洗涤的注意事项: 我们建议用普通的洗涤剂，冷水单独洗转印好的t恤，不可与其它衣服同时混洗，不可干洗或漂白剂，请不要揉搓转印部分，洗后立即凉干或用烘干机烘干。洗涤后，如果图像有脱落迹象，可将背纸覆盖在图像上，重新熨烫粘接．切勿用熨斗直接熨烫转印部分. product:light inkjet transfer paper description:with inkjet & color laser printers, a single step to make transfer for light colored fabrics. sizes availability:a (8.5''x11'') - 20 sheets, b (11''x17'')- 20 sheets, a4 (210mm x 297mm)-20 sheets, a3 (297mm x 420mm)- 20sheets, 42cm'x30m rolls
ink compatibility:water based dye & pigment ink. 1.application
this product is recommended with wax crayons, oil pastels, fluorescent markers, color pencil, mild solvent ink, eco-solvent ink, sublimation ink, water based pigment or dye inkjet ink for white or light-colored t-shirts, aprons, gift bags, mouse pads, photographs on quilts etc. the transfer peels off easily after it cools or with hot and can be applied with a regular household iron or professional heat press machine.
2. advantage
◆for many varieties，small of production. ◆technology is simple，don’t need plate making, direct printing, the process short , saves time and effort ◆designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics ◆ideal for personalizing t-shirts, canvas bags, wool garment, aprons, gift bags, mouse pads, photographs on quilts etc.
◆transfer peels off easily with hot (matte finish) or after cooling (glossy finish)
◆iron on with a regular household iron & heat transfer press machines
◆keeping the color and washes well, keep to washing of professional standards of textiles 3. compatibility for light inkjet transfers
it can be printed with water based inks in most printers such as: epson stylus photo 1390, r270, r230, pro 4400, canon pixma ip4300, 5300, 4200, i9950, ix5000, pro9500, hp desk jet 1280, hp photos mart d7168 , hp officejet pro k550 etc. some of color laser printers: epson aculaser cx11n, c7000, c8600, fuji xerox docuprint c525 a, c3210dx, canon laser shot lbp5600??lbp5900??lbp5500??lbp5800, canon clc1100??clc1130??clc1160??clc5000, canonirc2620??3100??3200
4. printer recommendations
1) store ht-150r in its original packaging in a cool, dry place.
2) only print onto the unprinted, coated side of transfer paper, select normal mode andmirrormode on your printer.
3) printer settings:normal papermode usingphoto print
4) before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges. straight after peel off the transfer film from the paper back.
5) first print the desired motif onto standard paper to check that the color and size are correct..
6) compatibility: it is designed to work with water based dye & pigment ink.
5. iron-on transfer processing
a. printed the transfer paper first. please use mirror image, and thencut out the motif without leaving a margin around the edges. take the motif toward to the cotton, then transfer it.
b.prepare a stable, heat-resistant surface suitable for ironing on.
c.preheat the household iron to the linen setting. briefly iron the fabric to ensure that it is completely smooth. do not use the steam function.
d.iron the transfer paper, applying heavy pressure. when moving the iron, less pressure should be given. don't forget the corners and edges.
e.continue ironing until you have completely traced the sides of the image. this entire process should take about 60-70 seconds for an 8"x 10" image surface. follow-up by ironing the whole image , heating all of the transfer paper again for approximately 10-13 seconds. f.peel the transfer starting at the corner withhot.
6. heat press machine transfer processing.
a. set heat press machine at 185°c, for 15 second using high pressure.
b. briefly heat the fabric for 5 second to ensure that it is completely smooth.
c.before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges.
d.before transferring, leave the printed image to dry for approx.5 minutes, cut out the motif without leaving a margin around the edges.
e. place transfer paper onto fabric with the printed image facing downwards.
f.heat press machine at 185°c, for 15--25 second.
g.peel off the back paper starting at the corner withhot. 7. washing instructions
1) waiting 24 hours before washing for the first time(drying time)
2) fabrics bearing our transfers are machine-washable up to 30°c, always wash garments inside out.
3) do not use aggressive washing detergents or bleach of any kind
4) do not tumble-dry
5) iron only on the reverse side.
8. material storage
conditions of 35-65% relative humidity and at a temperature of 10-30°c. | |
